Enjoy a 15% discount for the first purchase, discount code LIST15


Introduce several common faults of solar mosquito killer lamps

Solar Mosquito Killing Lamp is a kind of mosquito killing facility with excellent energy saving and environmental protection. It relies on the solar panel above to provide electricity, so it is very suitable for installation in the field, but the field environment is generally harsh, so the solar mosquito killing lamp occasionally has some problems. Phenomenon. The following safe and reliable solar mosquito killer lamp manufacturers will introduce some common faults of mosquito killer lamps for us.​​

Load image into Gallery viewer, Outdoor Electric Bug Zapper and fly killer

1. The lamp is not bright

During use, it is found that the mosquito trapping lamp in the solar mosquito killer lamp does not light up, but the load light of the controller's operation indicator light is on. If there is high voltage, it is judged that the lamp or ballast is damaged. If both ends of the lamp tube are black, you need to replace the lamp tube. Just replace the damaged ballast and lamp one by one to solve the problem of the lamp not lighting up.

2. The lamp is bright without high voltage

When it is found that the mosquito trapping lamp of the solar mosquito killing lamp is on but there is no high voltage, it is necessary to check whether the high voltage net is loose or whether the electric shock wire is interspersed. If the high-voltage net is not loose and the electric shock wire is interspersed normally, it can be judged that the high-voltage package is damaged, and the problem can be solved by replacing the new high-voltage package.

3. Sulfurized crystal of battery plate

If the battery plate in the solar mosquito killer shows the phenomenon of sulfide crystallization, then it is necessary to check the voltage in the battery of the mosquito killer, because this kind of imagination is generally formed by the over-discharge of the battery, and it should be written that the battery is charged with If the phenomenon of sulfide crystallization is serious, the battery plate should be replaced.

The above are the common faults of solar mosquito killer lamps in the process of use. In order to reduce the failure rate, mosquito killer lamps should be purchased from the top ten manufacturers of solar mosquito killer lamps for use. At the same time, the correct installation and operation instructions should be used. Protection, reduce the probability of failure of the solar mosquito killing lamp during use, and achieve the best mosquito killing effect.